PRIMER-PS is a ready-to-use, fast-drying topical primer specifically designed for Schluter self-adhesive membranes. It optimizes adhesion on substrates that are difficult to bond, such as OSB, plywood, gypsum-based concrete and vinyl. Suitable for interior applications, it enhances the bond on... Read more
| Manufacturer | Schluter |
| Storage conditions | PRIMER-PS should be stored between 10 °C (50 °F) and 32 °C (90 °F). Keep containers tightly closed when not in use. Rotate stock and use the oldest product first |
| Shelf life | 12 months from the date of manufacture shown on the packaging when kept in unopened, properly stored containers |
| US gallon | 1 |
| Litre (L) | 3.78 |
| Collection name | PRIMER-PS |
| Weight (kg) | 3.94 |
| Weight (lb) | 8.68 |
| Freeze-thaw resistance | Yes. 1 cycle at -18 °C (0 °F). If the primer has frozen, allow it to thaw at room temperature. Solid resin sedimentation may occur after freeze-thaw. Mix thoroughly before use |
| Works with | DITRA-PS, DITRAHEAT-PS and DITRA-HEAT-DUO-PS |
| Moisture vapour emission rate (MVER) | 8 lbs per 1000 ft² |
| Drying time | 10 to 60 minutes |
| Outdoor use | No |
| Indoor use | Yes |
| Thickness (mm) | 3.5 |
| Thickness (in.) | 0.13 |
| Thickness (inch fraction) | 1/8 |
Number of unit(s)
Cart
Your Cart is Empty
