The Schluter-FINEC-SQ profile provides finishing and edge protection for outside corners of tiled surfaces. It unites the discreet appearance of Schluter-FINEC with the square geometry of Schluter-QUADEC. Offered in larger formats to accept thicker tiles, the profile's finishing leg effectivel... Read more
| Manufacturer | Schluter |
| Corner angle | 135 |
| Colour | Grey |
| Manufacturer colour | Greige |
| Warranty | Wall and countertop profile - Limited 5-year warranty |
| Warranty (years) | 5 |
| Height (cm) | 1.1 |
| Height (mm) | 11 |
| Height (in.) | 0.44 |
| Height (in., fractional) | 7/16 |
| Width of exposed trim surface (mm) | 4.5 |
| Width of exposed trim surface (in.) | 0.19 |
| Width of exposed trim surface (in., fractional) | 3/16 |
| Length (cm) | 250 |
| Length (m) | 2.5 |
| Length (mm) | 2500 |
| Length (ft) | 8.21 |
| Length (in.) | 98.5 |
| Length (in., fractional) | 98-1/2 |
| Material | Aluminium |
| Collection name | FINEC-SQ |
| Colour number | TSBG |
| Weight (kg) | 0.35 |
| Weight (lb) | 0.77 |
| Corner type | Outside corner |
| Moulding transition type | Finishing and edge-protection profile for outer corners of floor coverings |
| Outdoor use | No |
| Indoor use | Yes |
| Intended for | Ideal for use with thicker tiles | Creates modern decorative patterns, interesting contrasts and coordinates with tiles and grout | Prevents tile edges from chipping | The profile's finishing lip is ideal for protecting beveled edges |
| Used on | Wall |
| Wall thickness for the moulding (mm) | 11 |
| Wall thickness for the moulding (in.) | 0.44 |
| Wall thickness for the moulding (inch fraction) | 7/16 |
Number of unit(s)
Cart
Your Cart is Empty
