Schluter Horizontal PVC KERDI-DRAIN-H flange - grey 2\" outlet without collar

The Schluter-KERDI-DRAIN is a floor drain designed to connect to the KERDI waterproofing membrane or other load-bearing waterproof membranes. It features a wide flange to which the KERDI membrane is bonded, ensuring a watertight junction at the tiled assembly surface. The system consists of a body and either a fully adjustable grate assembly or a tile-in cover plate: the grate assembly adapts to different tile thicknesses and offers lateral and tilt adjustments, while the tile-in cover, installed flush with the flange, is suitable for tiles of any thickness. The standard model connects directly to the drain line. The body is available in ABS, PVC, or stainless steel. The plastic bodies feature a bonding flange covered with a non‑woven fabric and are available with standard outlets of 2\" (50 mm) and 3\" (75 mm), to be joined to the piping using an appropriate adhesive. The stainless steel bodies offer standard no‑collar outlets in 2\" (50 mm) and 3\" (75 mm), as well as a 2\" (50 mm) threaded outlet: the no‑collar outlet connects to the piping via a flexible or mechanical coupling, while threaded outlets are assembled using sealant paste or tape. Because they are compatible with standard outlets, KERDI-DRAIN units are suitable for both new construction and renovations. The KERDI-DRAIN adapter set converts a traditional clamping-ring drain into a drain with an integrated bonding flange. It includes a stainless steel adapter ring with a rubber gasket and drilled with a series of holes compatible with common shower drains. The ring replaces the clamping ring and is fastened to the drain body using the existing nuts; watertightness is ensured by the rubber gasket and the Schluter-KERDI-FIX sealant/adhesive. The bonding flange inserts into the adapter gasket to form a watertight assembly. The adapter sets, offered in diameters of 5-1/4\" (133 mm) and 7-1/2\" (191 mm), are particularly useful where replacing a clamping-ring drain is difficult (for example, one stuck in a slab) and are suitable for mortar bed installations and KERDI-SHOWER-T/‑TS/‑TT bases. The KERDI-DRAIN grate assembly includes a frame adjustable in height and laterally to suit tile thickness and positioning, plus a grate or drain cover that inserts into the frame. The standard 4\" (100 mm) assembly has an exposed surface of approximately 1/8\" (3 mm) once installed and is available in stainless steel (finishes: raw, chrome, nickel, classic gold, antique gold, rose gold, or oiled bronze) or in anodized aluminum (finishes: brushed nickel, brushed copper or brushed brass). The 4\" (100 mm) STYLE frame, with minimal visible surface, pairs with three grate patterns: Floral (E), Curve (F) or Pure (G). STYLE grates are offered in brushed stainless steel (finishes: raw, nickel, classic gold, antique gold, rose gold) and in textured colored aluminum (stone grey, cream, greige, bronze, matte black and matte white). The 4\" stainless steel tile-in cover is coated with KERDI membrane and intended to receive tile or stone, providing an almost invisible drain appearance. The 6\" (150 mm) square or round stainless steel frames, with an exposed surface of approximately 3/16\" (5 mm) after installation, accept stainless steel grates or drain covers. Note that the grate assemblies supplied with the plastic KERDI-DRAIN model with a 3\" (75 mm) outlet and the residential adapter set only offer vertical and tilt adjustments (no lateral adjustment).